Xinghua Jinf Stainless Steel Co., Ltd.  

Product Name: Stainless Steel Z Anchor/Z Bracket/Marble Fixing Systems Model NO.: DZFIXINGS008 Type: Marble Angle Name: Z Anchor Other Used Name: Z Bracket,Marble Angle,Marble Fixing Systems Comapny Certificate: ISO9001,SGS Product Third-Party Certificate: SGS Finish: 2b,Pickled Package: Carton Packing Then on Wood Pallet Payment Term: Tt or LC at Sight MOQ: 5000PCS Trademark: DZ FIXINGS Transport Package: Carton Packing Then on Wood Pallet Specification: ACCORDING TO THE DRAWING Origin: China HS Code: 7326901000 Product Description Stainless Steel Z Anchor for Marble Fixing Systems/Stone fixing systems/Cladding fixing systems1,Description1)Size-Thickness:2mm-30mm2)Material:StainlessSteel,Carbon Steel3)Grade:SS304,SS316,SS201,SS202,INOX304,INOX316,CS4.84)Finish:2B,PICKLED,ZP,HDG5)Certificate:SGS6)Package:Carton packing thenonwoodpallet7)PaymentTerm:TTORLCATSIGHT8)DeliveryTerm:FOB,CNF,CIF,EXW9)MOQ:5000pcsStainlessSteelZ ANCHOR/Z BRACKET/MARBLE ANGLE1SizeThickness:2mm-30mm2MaterialStainlessSteel,Carbon Steel3GradeSS304,SS316,SS201,SS202,INOX304,INOX316,CS4.84Finish2B,PICKLED,ZP,HDG5CertificateSGS6PackageCarton packing thenonwoodpallet7DeliveryTermFOB,CNF,CIF,EXW8Payment TermTTORLCATSIGHT9MOQ5000pcs2,Other used name:Z Anchor,Z bracket,marble fixing systems,cladding fixing systems,restraint fixing systems3,Z Anchor Fixing Systems Introduction:1)Direct fixing into concrete walls with expansion bolts.Indirect fixing into sub channel system with hex bolts.2)Three dimensional adjustability-Quick and easy fixing.3)Installation at horizontal and vertical joints4)Recommended projection sizes up to 135mm&loads up to 800N.4,Z Anchor installation at horizontal joints and vertical joints1)Suitable for concrete walls.Anchors are fixied directly on to concrete walls with expansion bolts.Recommended projection size between 45mm and 135mmand loads up to 800N2)In horizontal joint installationm,slabs are pinned on the bottom and upper sides.Anchors act as load bearing carrying half the weight of the slabs above.Anchors also act as restrains,holding the slabs below and restraing against wing suction and pressure.3)In vertical joint installation slabs are pinned on the left and right sides.Anchors on the botton are load-bearing anchors carring the whole weight of the slab.Half the weight of the slab on the left and half the weight of the slab on the right.Anchors on the top are restraint anchors holding the slabs and restraning against wind suction and pressure.4)Three-dimensional adjustability allows quick and easy installation.5,Product Photo